Dual-Instructions

 

• For mounting, place the board on a soft surface (bed, carpet, blanket) to not risking scratch the ceramic socket.
• Insert the cables through the original holes of the board. 
• Connect the red connectors, it doesn’t matter which side.

• After installing the bulbs, the light socket may not be perfectly straight, you can turn it by hand gently.
• If you have trouble fitting the connectors into the holes in the board, try pushing in and twisting the red connector. If that doesn't work, use a 5mm diameter drill bit to file the holes by hand.

If you encounter any other problems, contact us on the support section of this website.